WHEEL & TYRE CLEANER
Dissolves dirt and brake dust

The product offers great flexibility and can be adapted to different levels of dirt through various dilutions:

- For deep cleaning of particularly stubborn dirt, dilute the product in a ratio of 1:3 (one part product for three parts water).
- To deal with dirt typical of the winter season, the recommended dilution is 1:5.
- For lighter dirt, typical of summer, use a dilution of 1:10.

Apply the product by spraying it directly onto the rim and tread of the tyre, making sure the surface is cold, and leave to act for 2-5 minutes without it drying.

Extend the application also to the wheel arch for a complete cleaning of the area.

After letting the product act, you can intervene mechanically to facilitate the removal of the most stubborn dirt.

Then proceed with a thorough rinse.

If the dirt persists, you can repeat the operation using a brush or brush to reach the most hidden and difficult parts. The combination of the mechanical action and the product formula produces a lubricating foam that encloses dirt, making it easier to eliminate during rinsing. The product can also be dispensed in the form of foam using a device such as the Nebula Foam hand pump. Even if the product is not designed to be used without mechanical action, the use of a pressure washer can allow, in cases of not too resistant dirt, to proceed without direct intervention. When finished, your rims will be completely clean and free of tire polish residue, ready for a safe hand wash.

If after using "Wheel and Tire Cleaner" you still notice deposits, especially in the gaps of the rims, it could be ferrous contamination rather than road dirt. In these cases, the use of a specific decontaminant such as "Iron Remover" is recommended to easily remove such residues.

Why Pre-Cleaning the Wheel Area Is Essential

Before washing the car, it is crucial to remove the specific dirt that accumulates inside the wheel compartment. This prevents heavy contamination from detaching later and potentially damaging the bodywork during the wash.

Typical Dirt Found in the Wheel Area

• On the Rims:
  Heavy buildup of brake dust, one of the most aggressive contaminants.
  
• On the Tires:
  Layers of old tire dressings mixed with road dirt.
  
• Inside the Wheel Compartment:
  Coarse road grime such as mud, winter salt, and debris, which is highly aggressive and must be removed before contact washing.
  

Cleaning this area first speeds up the entire wash process and significantly reduces the risk of scratching the paint during subsequent steps.

Wheel and Tire Cleaner – Maniac Line™

This product is specifically formulated to clean and restore:

• Rims
  
• Tires
  
• Wheel wells
  
• Suspension components
  
• Plastic wheel arch liners
  

It quickly dissolves brake dust, removes road grime, and eliminates old tire dressings, preparing the surface for fresh protection.

Key Benefits

• Removes brake dust and road dirt
  Effectively breaks down stubborn residues on rims and inside the wheel compartment.
  
• Cleans and strips tires
  Removes previously applied polishes, perfectly preparing the surface for new dressing.
  
• Highly versatile
  For stubborn dirt: use up to 1:10 dilution.
  Works great with brushes for deep cleaning of grooves and hard-to-reach areas.
  
• Lubricated, easy-to-work foam
  Provides safer and smoother cleaning during agitation.
  
• Safe on all materials
  Excellent compatibility with rims, plastics, tires—even whitewall tires.
  
• Restores original appearance
  Dissolves winter dirt, brake dust, and accumulated residues, bringing back a clean, refreshed look.
  
• Ideal for full wheel-well cleaning
  Its high detergency makes it suitable for suspension parts and plastic covers inside the wheel arch.
  
• Pleasant, sweet scent
  Enhances the user experience during cleaning.